curvadora mecanicas industriales

Mechanical sheet bending machines

Our mechanical cylinder models are one of the most preferred machines in the metal processing sector for light and medium duty.
Robust body and electric motor on the ascending and lower rollers are ideal for bending up to 3.0 mm sheet metal.
They allow a wide range of use, ideal for small workplaces.

Cilindradoras asimétricas

cilindradora curvadora de chapa
curvado manual

Asymmetrical Cylinder MC Motorized

Our MC models are manufactured for general bending jobs, especially for a bending capacity of up to 2.0 mm. With a wide range of uses, it is particularly suitable for small workplaces.

  • Working length: 1050-2070 mm
  • Curved thickness: 0.8-2 mm
  • Main roller diameter: 46-76 mm
  • Rotations: 9 rpm
  • Engine: 0,75 kw
  • Length: 1350-2500 mm
  • Width: 750 mm
  • Height: 1200 mm
  • Weight: 220-585 mm

*Dimensions vary according to model

roladora mc manal
curvado manual

Asymmetric cylinder MC Manual

Our MC models are manufactured for general bending jobs, especially for a bending capacity of up to 2.0 mm. With a wide range of uses, it is particularly suitable for small workplaces.

  • Working length: 1050-2070 mm
  • Curved thickness: 0.8-2 mm
  • Main roller diameter: 46-76 mm
  • Length: 1350-2800 mm
  • Width: 300-750 mm
  • Height: 280-1200 mm
  • Weight: 220-535 mm

*Dimensions vary according to model

cilindradora asimetrica curvado-chapa
curvado manual

Asymmetric Cylinder LLC Motorized

LLC roller benders, with their robust steel body and asymmetrical movement, are our mid-range rollers. Ideal for bending lightweight sheet metal such as aluminium, sheet metal or stainless steel.

  • Working length: 1070-1550 mm
  • Bending thickness: 1.2-3 mm
  • Main roller diameter: 86-96 mm
  • Rotation: 9 rpm
  • Engine: 0,75 kw
  • Length: 1550-2580 mm
  • Width: 760 mm
  • Height: 1250 mm
  • Weight: 360-600 mm

*Dimensions vary according to model

roladora chapa manual
curvado manual

Asymmetric Cylinder LLC Manual

  • Working length: 1070-1550 mm
  • Curved thickness: 1,2 – 3 mm
  • Main roller diameter: 86-96 mm
  • Length: 1850-2880 mm
  • Width: 760 mm
  • Height: 1250 mm
  • Weight: 325-565 mm

*Dimensions vary according to model

cilindradora electrica
precurvado manual asimetrico

Asymmetric Cylinder LLCE Motorized

Our asymmetrical models are ideal for general plate bending. They are used especially for bending capacities up to 3.0 mm. With a wide range of use, it is especially preferred for small workplaces.

  • Working length: 1070-2070 mm
  • Bending thickness:1.5-3 mm
  • Main roller diameter: 90-95 mm
  • Rotation: 9 rpm
  • Engine: 0.75-1.1 kw
  • Length: 1350-2850 mm
  • Width: 760 mm
  • Height: 1250 mm
  • Weight: 350-600 mm

*Dimensions vary according to model

roladora manual chapa
precurvado manual asimetrico

Asymmetrical cylinder LLCE Manual

This MC model is ideal for working with sheets of a few millimetres.  The ergonomic design allows easy bending without much effort.

  • Working length: 1070-2070 mm
  • Curved thickness: 1.5-3 mm
  • Main roller diameter: 90-95 mm
  • Length: 1350-2850 mm
  • Width: 760 mm
  • Height: 1250 mm
  • Weight: 350-600 mm

*Dimensions vary according to model

CIlindradrora asymmetrical 3 Rollers FYSM

Our models of asymmetrical rollers are one of the preferred machines in the field of metal processing for light and medium jobs with their strong body, welded and electric motor in the upper and lower rollers.

General characteristics

  • Axles made of SAE 1050 (CK-45) certified steel
  • Spiral type chain and belt reducer with toothed accessories
  • Rollers driven up and down
  • Machine body made of steel ST-52
  • Rear Roller Engine
  • Bending accuracy with brake motor
  • Certified to CE standards
  • Cone bending roller
  • Central lubrication system
  • Mobile electrical control panel
cilidradora asimetrica lamina
precurvado 3 rodillos asimetricos

See how it works

Technical characteristics

  • Working length: 1070 – 3070 mm
  • Min. pre-curved diameter: 6 -8 mm
  • Min. bending diameter: 7 – 10 mm
  • Main roller diameter: 130 – 220 mm
  • Diameter of side rollers: 195 – 330 mm
  • Engine: 2,2 – 5,5 kw
  • Length: 2550 – 4950 mm
  • Width: 630 – 1120 mm
  • Height: 1020 -1380 mm
  • Weight: 1150 – 5870 mm

*Dimensions vary according to model

Optional accessories

    • Three-roller system, with fixed top bending roller.

The upper roller opens easily to remove the curved plate or tube from the bending cylinder.

    • 3 Rollers with roller extension.

They allow not only to bend plates, but also angles, tubes, profiles. It is a profile bending machine and a plate bending machine all in one.

    • Manual clamping roller.

The movement of the lower roller in charge of clamping the plate is manual. As we are manufacturers we can incorporate a motor reducer on demand in any bending machine.

    • Precurved at one end.

This type of plate roller has asymmetrical rollers which allows the pre-bending of the sheet only at one end.

    • 42CrMo rollers surface hardened to 48-55 HRC.

Our rollers are manufactured with hardened rollers in order to bend stainless steel plate without deteriorating and extending its useful life.

    • The 3 rollers have the same diameter.

The three rollers with the same diameter guarantee a robust bending process avoiding the bending of the central part of the roller due to not having enough material.

    • Siemens electric motor, electrical components of first European marks CE.

All our rollers are made with electrical components from leading European brands such as Siemens, Schneider, Telemechanique … etc.

    • Bending speed 400 mm/min.

This working speed allows the bending machine to make tubes in a very short time.

    • Emergency stop by rope according to regulations.

All our machines comply with the strict EC regulations.

    • CE regulation certified by ECA.

All our sheet metal bending cylinders comply with the specific regulations for these machines.

    • 1 Year warranty.

Our bending machines come with a full one year warranty covering factory defects.

Technical Characteristics of Rolling Machines

Aerial crane for large diameters
Hydraulic side supports for large diameters
Material feed table
Variable rotation speed
NC Control Panel
CNC control system
Simple bending machine
Hardened shafts

Request a quote without obligation

Responsable: FEYSAMA S.L. Purpose: Respond to your request Legitimation: Consent. Addressees: Our servers. We do not use external databases. Rights: Access, rectification or deletion, limitation of processing and opposition to processing. Privacy Information

Normativa de seguridad CE UNE-EN Máquinas hidráulicas
Safety standard CE UNE-EN 12622:2009+A1:2013

Due to its dangerousness, the hydraulic roler must comply with strict safety standards imposed by the EC for both new and second-hand machines. These standards ensure the correct operation of the cylinder minimizes the risk of injury by negligence of the operator.

Our company has been certified by Bureau Veritas to meet its stringent requirements.

This post is also available in: French Spanish